| |
 |
Tec/CLEAN® Surface Cleaner 6384 is a fast-evaporating solvent wash developed to maximize shop’s productivity by decreasing surface preparation time. Tec/CLEAN® is used to remove wax, oil, grease and silicone contaminants for all:
| |
Bare metal substrates to prepare for primer
Cured enamel or lacquer finishes to prepare for finishing
Removes sanding residue before recoating |
|
|
| VOC as packaged . . . . . . . . . 6.20 lbs/gal or 743 gms/ltr |
|
| Use at package consistency. |
|
 |
| 1. |
Saturate a clean cloth with Tec/CLEAN® 6384. |
| 2. |
Apply to areas to be painted and adjacent panels. Wipe surface thoroughly with Tec/CLEAN® 6384 and apply only to one panel at a time. |
| 3. |
Wipe off with a second clean, dry cloth before Tec/CLEAN® 6384 is allowed to dry. If drying occurs, repeat application. |
| 4. |
Should be used before sanding and can also be used after sanding prior to sealing or topcoating. |
Features: |
| 1. |
Solvent cleaner |
| 2. |
Mild solvent - mild odor |
| 3. |
Fast evaporation |
Advantages: |
| 1. |
Removes wax, oil, grease and silicone. |
| 2. |
Does not swell or soak into the surface. Does not burn. Does not remove Acrylic Lacquer color. |
| 3. |
Less time required to clean vehicle. |
Benefits: |
| 1. |
Eliminates fisheye cratering that would require rework or the addition of fisheye eliminator. Promotes adhesion. |
| 2. |
Eliminates sand scratch swelling from too strong of a solvent that would require rework or additional coats of topcoat. Eliminates color sanding, buffing longer and using more compound. |
| 3. |
Increases shop production time. |
|
