KLEANZ-EASY II™ Low VOC Surface Cleaner 6388 is a water-based emulsion that contains a surface active "detergent" and a special blend of solvents. It is designed to remove oil, grease, wax, silicone, and other surface contaminants, as well as sanding residue from bare metal and plastic; OEM topcoats and primers; and refinish undercoats to prepare surface for painting Used on plastic substrates, KLEANZ-EASY II™ minimizes static build-up.

VOC (as packaged) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1.40 lbs/gal or 167.72 gms/ltr as packaged less water & exempt compounds. . . . . . . .8.30 lbs/gal or 994.34 gms/ltr

None -- use at package consistency.* *If a VOC level of 0.58 lbs/gal is required, KLEANZ-EASY II™ may be reduced 150% with clean water.

1.	Saturate a clean cloth with KLEANZ-EASY II™ 6388.
2.	Apply to areas to be painted and adjacent panel. Wipe surface thoroughly with KLEANZ-EASY II™ 6388 and apply only to small areas at any one time.
3.	Wipe off with a second clean, dry cloth before KLEANZ-EASY II™ 6388 is allowed to dry. If drying occurs, repeat application.
NOTE: In cooler temperatures and high humidity, step 3 may be needed to be repeated to remove KLEANZ-EASY II™ 6388. Or, after step 3, blow clean, dry air across the surface to enhance the evaporation of KLEANZ-EASY II™ 6388.

1.	On lacquer surfaces, avoid prolonged contact with KLEANZ-EASY II™ 6388 or softening will occur. If this occurs, allow surface to dry thoroughly before next step. (A Light sanding may be needed if KLEANZ-EASY II™ 6388 has swelled the lacquer surface.)
2.	Do not use KLEANZ-EASY II™ 6388 as a cleaner for solvent sensitive substrates such as lacquer primer-surfacer.
3.	Best results are obtained when temperatures are maintained above 70ºF when using KLEANZ-EASY II™ 6388.
4.	Avoid prolonged contact with bare metal and dry thoroughly to prevent flash rusting.
5.	Protect KLEANZ-EASY II™ 6388 from freezing. If this occurs, allow KLEANZ-EASY II™ 6388 to warm slowly to room temperature before use. Home